Phones answered 24/7New Bedford, MA
Call (833) 751-2102
Phones answered 24/7Call any time(833) 751-2102
Serving Bristol County

Asphalt shingle roof replacement for New Bedford houses

Asphalt shingle is the common covering on the city's houses, and a sound replacement starts with the deck it sits on.

  • Leaks, flashing and tear-offs
  • Triple-deckers and low-slope decks
  • Coastal wind and storm damage

Get a fast quote

Fastest: call (833) 751-2102. Or send this and we call you back.

Asphalt Shingle Replacement

Asphalt Shingle Roof Replacement: what it covers

Quick answer

Asphalt shingle roof replacement means stripping the existing covering, repairing the deck and flashing, and laying a new architectural asphalt shingle over underlayment and drip edge. New Bedford Roofing installs asphalt shingle roofs across New Bedford and the nearby towns, and a local roofer measures the roof before the scope is written. Call (833) 751-2102.

Asphalt Shingle Roof Replacement illustration for New Bedford, MA

Asphalt shingle is the most common covering on the houses that New Bedford Roofing works on in New Bedford, and it is the material most homeowners picture when they think of a roof. It comes in several grades and profiles, and the difference between a basic three-tab shingle and a heavier architectural shingle is mostly in the thickness, the wind rating and the look. The choice matters less than the deck and the flashing it is laid over.

Many older houses have had asphalt shingle put on at least once before, and the layers beneath the current covering are the first thing to check. A roofer lifts a tab at the eave and at the rake to count them, then examines the deck for rot and for the nails that have been driven through several generations of material. That count shapes whether the crew can overlay or must tear off.

The rest of the system is the underlayment, the drip edge and the ventilation. Underlayment keeps water off the deck if a shingle is blown up or a joint is missed. Drip edge directs water into the gutter and away from the fascia. Ventilation keeps the attic dry and cool, and it is often the detail that decides how long the new shingles last on the underside as well as on top.

Service area
New Bedford & Bristol County
Availability
Phones answered 24/7
Warning signs

Signs you need asphalt shingle roof replacement

Asphalt shingle roofs are slippery when wet, frosted or covered with granules that have worked loose. Crews use fall protection on steep slopes and keep the work area clear of nails and debris. Homeowners should keep the drive and walkways clear, stay indoors beneath the work while the old covering is removed, and not walk on the new roof until the crew says it is safe.

  • Shingles that curl, cup or crack across most of a slope
  • Granules in the gutter and bald patches on sun-facing planes
  • Shingles that have lifted at the rake or ridge in several places
  • More than one layer of shingle showing at a damaged edge
  • Dark or soft boards in the attic beneath the covering
  • Nail heads that have backed out of the boards in a row
  • A roof that has been patched many times in different colors
Our process

How our asphalt shingle roof replacement visit works

  1. Count layers and measure the roof

    The crew lifts tabs to count the layers and measures each plane, pitch and penetration. The layer count decides whether the existing covering can be overlaid or must be removed, and the measurements set the quantity of material for the scope, so the order matches the roof.

  2. Check the deck and the attic

    Before the old covering comes off, the underside of the boards is read for rot, staining and sagging. Soft spots at valleys and around chimneys are marked. The attic is also checked for ventilation, since a poorly vented attic will age the new shingles from below.

  3. Strip the old covering

    The old shingles are removed to the deck and carried away. Nails are pulled or driven flush, and any soft sheathing is cut out to sound wood and renewed. The deck is left clean and dry, because shingles laid over wet or uneven boards will not lie flat.

  4. Lay underlayment, drip edge and starter

    Drip edge goes on at the eave and rake, and underlayment is laid in overlapping courses from the eave up. A self-adhering membrane is set along the eaves, in valleys and at wall junctions, where water is most likely to get under the shingles. A starter strip is laid along the eave so the first course is sealed from the bottom.

  5. Install the shingles and finish the ridge

    The field shingles are laid course by course with their joints staggered, and each course is checked for straightness. Ridge caps and any ridge ventilation are fitted last. The site is swept with a magnet, and the crew walks the finished roof with the homeowner to show the flashing and the vents.

What decides between an overlay and a tear-off?

The number of layers, the condition of the deck and the flatness of the surface decide whether an overlay is sound. A tear-off is needed where any of those three is in doubt.

An overlay adds weight to the framing and conceals the nail heads and soft spots of the layer beneath. On a roof with one sound layer, a dry deck and a flat surface, the trade-off can be reasonable. On a roof with two or three layers, or a deck that is wet or uneven, the overlay only postpones a problem that a tear-off would find and fix now.

Why does the underlayment matter under a good shingle?

The underlayment is the second line of defense, and it keeps water off the deck when a shingle is lifted by wind or a joint is missed during installation.

A shingle that is laid correctly sheds most water, but no shingle is a complete seal on its own. Underlayment, and a self-adhering membrane at the eaves and valleys, keeps any water that gets past the covering from reaching the boards. Skipping it to save time is one of the commonest reasons a new roof leaks in its first winter.

How does ventilation affect the shingles?

Attic ventilation removes the heat and moisture that build up beneath the roof, and an attic that is poorly vented ages the shingles from below.

Heat trapped in an attic softens the asphalt and dries the mat, while moisture from the house condenses on the cold boards in winter. Intake at the eave and exhaust at the ridge let air move through the space. The scope should state the ventilation plan, because a new covering over an unvented attic can fail faster than the old one did.

Does a shingle replacement need a permit?

It depends on the town and on the scope of the work, so the answer comes from the local building department rather than a general rule.

Sources disagree on when a re-roof needs a permit, and this site does not state a threshold. The building department in the town where the house stands can confirm the requirement before the job starts. The state building code, 780 CMR, tenth edition, took effect on 11 October 2024, and the crew should say which edition it is working to.

Options

Types and options for asphalt shingle roof replacement

Three-tab shingle

The three-tab shingle is a single-layer product with a flat profile and a uniform look. It is lighter than an architectural shingle and carries a shorter service life in most conditions. Where it is chosen, the scope should state the wind rating of the product actually installed, not the rating of a different grade.

Architectural asphalt shingle

The architectural shingle is a laminated product with a thicker profile and a dimensional look. It is heavier and generally has a longer service life and a higher wind rating than a three-tab. Most replacements in the city use this grade, and the scope names the rating and the profile so the homeowner can compare them directly.

Tear-off and new deck

A full tear-off removes every layer and checks the deck across its full area. It is the usual answer on older houses, because it reveals the deck and lets the crew correct it. The time and debris involved are greater than for an overlay, but the deck is then known and the flashing can be rebuilt to the current work.

Overlay on a sound single layer

Where a single sound layer of shingle is in place and the deck is flat and dry, a new layer can be laid over it. An overlay is quicker, but it adds weight and hides any rot beneath, so the crew only recommends it after the deck has been checked from below and found sound.

Slope-by-slope replacement

When one or two slopes have failed and the rest are sound, those planes can be replaced on their own. The new work is tied into the sound slopes along the ridge and valleys, and the shingle is matched as closely as the supply allows, which can leave a visible change in tone.

Bristol County

Why asphalt shingle roof replacement is different in the South Coast

Asphalt shingle is the most common covering on the city's houses, and it is often laid over an earlier layer that has never been removed. A roofer in New Bedford counts the layers before quoting, because the count changes the whole scope.

The houses of the South Coast towns have a mix of steep, shingled roofs and lower sections, and the same shingle must be detailed differently on each. The crew plans the valleys and the junctions as carefully as the open field.

Wind on the bay side tests the edge of an asphalt shingle roof more than its field. Rake and eave nailing, and the starter strip, matter more on these roofs than on a sheltered inland house, and the scope specifies them.

Skip the guesswork. Call for a straight answer.

Tell us what's happening and we'll tell you honestly whether it's a quick fix, and what asphalt shingle roof replacement should cost.

Related

Roof Replacement

The old covering comes off to the deck, the deck is checked, and the new roof is built on sound wood.

Ice Dam and Snow Removal

Ice at the eave backs water under the shingles, so the job is to clear the blockage safely and find the leak it caused.

Attic Ventilation

Air moving through the attic keeps the roof boards dry and cold, and it protects the shingles and the snow line.

Guides

Read before you book

FAQ

Asphalt Shingle Roof Replacement FAQs

What is the difference between a three-tab and an architectural shingle?

A three-tab shingle has a flat profile and a uniform look, while an architectural shingle is laminated, thicker and dimensional. The architectural grade is generally heavier and carries a longer service life and a higher wind rating, and the scope names the rating of the product actually installed.

Can I choose the color?

Color is chosen from the range the supplier carries, and the choice affects how the roof looks more than how it performs. The crew can show samples on the house so the homeowner can compare the color against the siding and trim before the order is placed.

Why do you need to replace the drip edge?

Drip edge directs water off the fascia and into the gutter, and an old or bent piece lets water run behind the fascia. It is a small addition while the old covering is off, and the scope usually includes it for that reason.

How long should a new asphalt roof last?

The service life depends on the grade of shingle, the ventilation, the slope and the exposure to wind and sun. The scope does not promise a number of years. It states the product and the warranty, and the homeowner can compare them directly.

Is the warranty on the shingles the same as the labor warranty?

No. The shingle warranty comes from the manufacturer and covers the product, while the labor warranty is the crew's own promise about its workmanship. Ask for both in writing and keep them with the house papers.

How do I start a replacement?

Call (833) 751-2102 and describe the roof's age, the number of layers you know of and any leaks. The crew will book an inspection, measure the roof and write a scope that lists the layers, the deck, the underlayment and the flashing.

WhatsApp